Open an STL

Drop it anywhere, or choose a file. Every hole that fits an insert is found for you.

Machine Set up your machine

Two minutes: bed size, fence, iron, float sensor, and the insert tray. Every answer has a sensible default.

How it works
  1. Place the partSnap it into the fence corner, or fill the bed with copies.
  2. Pick the holesEvery hole that fits an insert is found for you.
  3. PressPreview the run, then press over USB or save the G-code.

Examples

Each one shows off a feature
Show
Found Pressing Tip travel

Keyboard

Nothing needs these; every action has a button too.

M V H RMove parts, pick holes, place a hole, measure
BPick the face that goes on the bed
Alt while draggingMove freely, no snapping (Shift: 0.1 mm steps)
Shift-click, Shift-dragSelect holes in the view
Ctrl ASelect every hole shown in the list
DeleteTake the selected holes out of the press order
EscClear the measurement, then the selection, then the tool
ArrowsNudge the part 1 mm with Move (Shift: 10 mm); jog on the machine screen
IShow or hide the iron at the hole you point at
SpacePlay or pause the preview
FFit the view
Ctrl ZUndo (add Shift to redo)